Heckler & Koch G3 – information excerpted from wikipedia.org
The G3 is a 7.62mm battle rifle developed in the
1950s by the German armament manufacturer Heckler & Koch GmbH (H&K) in
collaboration with the Spanish state-owned design and development agency CETME
(Centro de Estudios Técnicos de Materiales Especiales).
The G3A3 (A4) uses either steel (260
g) or aluminium (140 g) double-stacked straight box magazines, or
a 50 round drum magazine. Original H&K drums are rare and command high
prices, a reproduction is available at much less cost from Allied Armament.
H&K developed a prototype plastic disposable magazine in the early 1960s,
but it was not adopted as aluminum magazines were just as light and proved more
durable, as well as easier to produce.
The G3 is a modular weapon system. Its butt-stock, fore-stock and
pistol-grip/fire-control assembly may be changed at will in a variety of
configurations (listed below). For example: by simply removing push pins the
fixed butt-stock can be removed and replaced with a telescoping butt-stock.
JG096
The JG096
airsoft gun is a replica of the well-known G3 rifle. This model has a shortened
barrel. The stock has been removed from it as well. Thanks to this, the gun has compact size,
which is virtually identical with the size of the PDW (Personal Defense
Weapon).
The airsoft
gun is made of ABS and metal. The sights, barrel, magazine, the RIS rail, and
buffer tube with sling mount are made of metal. The pistol grip, handguard, and the
body of the airsoft gun are made of durable ABS. The body is made with such detail
that it has imitations of welds exactly in the same places as the ones on real
steel equivalent.
The set includes:
- JG096
replica
- a hi-cap
magazine (500 BBs)
- 8.4V
1100mAh battery
- a charger
Technical details:
Product Name:
JG096
Manufacturer:
JG
Warranty:
12 months
Velocity [FPS]
It is the spped of bb, while its leaving the innerbarrel of replica. This speed is measured in FPS (Feet Per Second).
1 FPS = 0,3 m/s
1 J = 99 m/s
1 J = 326,7 FPS
:
365
Propultion
Replicas have spring, electric or gas propultion. Spring models need to
reload after each shot (pull back the lock) to enter the ball into the
chamber. At the same time it pulls spring back, to be able to
give a shot. Electric replicas depends on the battery,
whereby the engine drives the whole gearbox, and a gas models, push
the BB by gas, which loads in magazine (in these replicas ther is
not spring).
:
Electric propulsion
Gearbox version
Indications v2, v3, v6 does not mean the level of advance, but only
shape of gearbox skeleton which was used and selected by the
manufacturer
depending on the capabilities of the body of the replica. For example,
a
models of the M4/M16 family, MP5, have a v2 gearbox, while the AK
family have gearbox v3.
:
Gearbox v2
Type of fire:
Single, auto
Made of:
ABS + metal
Lenght [mm]
The
length of the replca is measured between the two most distant points of
each other. Different models have several of these values, because of
its design allows to increase or decrease it length (eg. folding stock or
extended flash hider).
:
475
Weight [g]
This is a value that includes the weight of the replica, magazine and
other accessories that are include in set without a battery, charger,
cleaning rod, etc., etc.
:
2166
Battery [V]
Battery
voltage is responsible for the frequency of shots. It must be
remembered that, the stronger spring is in its replica, the higher
voltage must have the battery, because the motor that drives the
whole mechanism needs more energy to stretch the spring.
:
8,4
Type of battery
NiCd
rechargeable battery is characterized by high efficiency
current-carrying capacity, but there are disruptive effect on memory.
Should be unloaded and loaded in the full cycle, ie, it is recommended
to fully discharge, and after unloading must charge the battery
immediately without leaving it for a long time in a discharged state.
NiMH batteries have a higher self-discharge over time and shorten the
life - on the other hand, they earn about 30% more capacity.
:
Ni-Mh
Magazine type:
Hi-Cap magazine
Magazine capacity [pcs]:
500
Hop-Up
Hop-Uup system is used for overclocking bb during the shot (putting
it in rotation), through which, it extends its flight
path. Acting laws of physics make that bb lift up,
while the gravitational force take it down. Appropriate
adjustment of Hop-Up, will compensate for these two factors, which
result in long and straight flight for longer distance and be greater focus shot (to improve accuracy).
:
Yes, regulated
Blow Back
Blow back is a simulation system of the cocking lever - it imitates the
work of it as the equivalent sharp. This system raises the realism and
adds a lot more experience during shooting.
Power of all presented replicas is less than 2 [J]. You cannot buy a replica in our shop if you are under 18. Do not shoot at other persons, birds or animals.
