GFG03 carbine replica (ASCU version)

  • Made of: metal and plastics
  • Length: 770 / 855mm
  • Weight: 3062g
  • Colour: black
  • Muzzle velocity: ~400 FPS
  • Powered by: a battery
  • Version with ASCU module
  • Manufacturer: GFC Guns

Click to zoom

GFG03 carbine replica (ASCU version)
Manufacturer: GFC Guns
Product code: GFG-01-001815
Very small quantity of stock
Ready to ship in 1days
Cost from €1,66
235.03 / 1pcs
You save 42% (€167,63).
In stock
1463.07 pts
97.54 pts
  • Delicious

GFG03 carbine replica (ASCU version) 

The GFG03 replica is made of metal and durable plastic. The replica’s body, the stock’s pipe, the outer barrel, the RIS rails, the iron aiming sights and all of the minor elements such as the trigger, the magazine release lever or the firing mode selector lever are made of metal. The stock and the profiled pistol grip, just like the RIS rail covering panels are made of plastic. 

The battery is located in the SF type stock. The carbine is equipped with a large type plug with a installed MOSFET system. The reinforced TORQUE-UP thread-wheels, the metal spring guide, the reinforced gearbox frame and the reinforced piston increase the replica’s lifespan while the high torque motor combined with the low-resistance wiring significantly increase the efficiency of the replica. 

Metal ball bearings, a ball bearing piston head and also a ball bearing situated in the motor thread-wheel were used in this construction.  The next nice surprises which await us after we take the gearbox apart are: the delayer and the new generation tappet plate and the chromed cylinder. 

The Hop-Up rubber which is installed with the use of temperature ensures a great sealing of the system while the standard 6,04 precision barrel significantly raises the utility value of the replica.

The ASCU is a two-part electronic module ( the control module and the sensor module ) which, upon being installed in the Airsoft replicas, significantly improve their operation. The traditional joint module was replaced with a sensor module which monitors the actual position of the piston thread-wheel, the firing mode selector lever and the trigger. The gathered information is sent to the control module – in which the software located in the processor analyzes it and controls the replica’s motor with the use of the MOSFET active break.

ASCU Gen. 3+ includes the following upgrades: 

- added polymer padding to the circuit boards, protecting them from damage during installation
- obsolete short-circuit software removed, making shots in semi-auto much faster
- every pull on the trigger results in a single shot, new system prevents any double-shots
- new cut-off lever and selector plate designed specially for the ASCU
- new, thicker wires
- no need to dremel or modify the reinforced gearboxes.

The ASCU improves the operation of a V.3 gearbox and makes that the replica equals the more expensive replicas and the more sophisticated PTW class replicas. The ASCU system monitors the operation of the replica no matter the speed of squeezing the trigger and is responsible for the full cycle of the piston’s operation, both in the semi-automatic and full automatic firing modes. The piston stops in the starting position after each shot.

The ASCU is equipped with the Low Drain Protection system which is specially designed to secure the lithium-polymer (LiPo) batteries from being damaged.

In case of any emergency, the ASCU stops the firing mode in the replica and, therefore, secures the inner elements from further damage.

The ASCU is easy to install in the replica which is equipped in the V.2 gearbox. Most of the models does not require the modification of the airsoft rifle’s original parts. Yet, in some cases, some minor changes may have to be introduced – thanks to this the installation process will be completed without any problems.

Full details below:

The set does not include a battery or a charger.

The set includes:

- the replica
- a magazine


Tech specs:
Replika karabinka GFG03 (ASCU version)
GFC Guns
24 months
Velocity [FPS]:

It is the spped of bb, while its leaving the innerbarrel of replica. This speed is measured in FPS (Feet Per Second).

1 FPS = 0,3 m/s

1 J = 99 m/s

1 J = 326,7 FPS

Propulsion / Powered by:
Gearbox version:

Indications v2, v3, v6 does not mean the level of advance, but only shape of gearbox skeleton which was used and selected by the manufacturer depending on the capabilities of the body of the replica. For example, a models of the M4/M16 family, MP5, have a v2 gearbox, while the AK family have gearbox v3.

v2 Gearbox
Type of fire:
Single, auto
Made of:
Metal + plastic
Lenght [mm]:

The length of the replca is measured between the two most distant points of each other. Different models have several of these values, because of its design allows to increase or decrease it length (eg.  folding stock or extended flash hider).

770 / 855
Inner barrel length [mm]:
Weight [g]:

This is a value that includes the weight of the replica, magazine and other accessories that are include in set without a battery, charger, cleaning rod, etc., etc.

Battery included:

NiCd rechargeable battery is characterized by high efficiency current-carrying capacity, but there are disruptive effect on memory. Should be unloaded and loaded in the full cycle, ie, it is recommended to fully discharge, and after unloading must charge the battery immediately without leaving it for a long time in a discharged state.
NiMH batteries have a higher self-discharge over time and shorten the life - on the other hand, they earn about 30% more capacity.

Magazine type:
Hi-Cap magazine
Magazine capacity [pcs]:

Hop-Up system is used for overclocking bb during the shot (putting it in rotation), through which, it extends its flight path. Acting laws of physics make that bb lift up, while the gravitational force take it down. Appropriate adjustment of Hop-Up, will compensate for these two factors, which result in long and straight flight for longer distance and be greater focus shot (to improve accuracy).

Yes, adjustable
Blow Back:

Blow back is a simulation system of the cocking lever - it imitates the work of it as the equivalent sharp. This system raises the realism and adds a lot more experience during shooting.

Users reviews
Ask for this product:

If this description is not sufficient, please send us a question to this product. We will reply as soon as possible.

Your e-mail:
This field is required for placing an order.
This field is required for placing an order.
fields marked with - This field is required for placing an order. - are required
Recommend this product:

If you want to tell your friend about this product, please use the form below.

This field is required for placing an order.
You can add more e-mail addresses by separating them with a coma
This field is required for placing an order.
This field is required for placing an order.
fields marked with - This field is required for placing an order. - are required
This page uses cookie files to provide its services in accordance to Cookies Usage Policy. You can determine conditions of storing or access to cookie files in your web browser.