TGM PM5 A4 RTB EBB sub-machinegun replica
The TGM A4 RTB sub-machinegun replica is made of high quality plastic and steel. The elements such as the body, the iron aiming sights, the magazine and the mounting screws are made of steel. The outer barrel and the stock’s pipe are metal. The stock is made of plastic and is equipped with a rubber stock’s foot. It is adjustable in three-position. This allows to adjust the replica to the operator’s silhouette. It also a great solution whenever the need to change the battlefield from an open area to an urbanized area occurs.
In order to gain access to the Hop-Up chamber all you need to do is pull the cocking handle and block it in the backwards position. The replica uses an uncommon solution if it comes to the battery. The battery is inbuilt for good in the front-grip. No wiring, plugs or elements that could be broken or damaged significantly influences the comfort of use of the replica. The manufacturer includes with the set two such foregrips and a dedicated flashlight with charger.
The replica is equipped with a EBB system which perfectly imitates the operation of the real firearm’s bolt carrier. It makes the bolt carrier dummy move and gives a “kick effect” that can be felt on the shooter’s arm.
set also includes an additional flash-hider which can be detached in the matter
The set includes:
- the TGM PM5 A4 RTB EBB sub-machinegun replica,
- two front grips with inbuilt batteries,
- a magazine,
- a charger with wiring,
Replika pistoletu maszynowego TGM PM5 A4 RTB EBB
It is the spped of bb, while its leaving the innerbarrel of replica. This speed is measured in FPS (Feet Per Second).
1 FPS = 0,3 m/s
1 J = 99 m/s
1 J = 326,7 FPS
|Propulsion / Powered by:|
Indications v2, v3, v6 does not mean the level of advance, but only shape of gearbox skeleton which was used and selected by the manufacturer depending on the capabilities of the body of the replica. For example, a models of the M4/M16 family, MP5, have a v2 gearbox, while the AK family have gearbox v3.
|Type of fire:|
Metal + plastic
The length of the replca is measured between the two most distant points of each other. Different models have several of these values, because of its design allows to increase or decrease it length (eg. folding stock or extended flash hider).
|Inner barrel length [mm]:|
This is a value that includes the weight of the replica, magazine and other accessories that are include in set without a battery, charger, cleaning rod, etc., etc.
|Battery Voltage [V]:|
rechargeable battery is characterized by high efficiency
current-carrying capacity, but there are disruptive effect on memory.
Should be unloaded and loaded in the full cycle, ie, it is recommended
to fully discharge, and after unloading must charge the battery
immediately without leaving it for a long time in a discharged state.
|Magazine capacity [pcs]:|
Hop-Up system is used for overclocking bb during the shot (putting it in rotation), through which, it extends its flight path. Acting laws of physics make that bb lift up, while the gravitational force take it down. Appropriate adjustment of Hop-Up, will compensate for these two factors, which result in long and straight flight for longer distance and be greater focus shot (to improve accuracy).
Blow back is a simulation system of the cocking lever - it imitates the work of it as the equivalent sharp. This system raises the realism and adds a lot more experience during shooting.