SA-B14 KeyMod 12” Carbine Replica (ASCU2 Gen.4+ version)
SA-B14 by Specna Arms was mostly made from an alloy of zinc and aluminum with several steel elements placed in the most troublesome spots of the replica (pins, screws and tactical sling swivels). The SF type stock, which stores a battery, as well as the pistol grip were made from polymer. The body of the replica has undergone a process of anodizing, which guarantees a high level of protection against corrosion. The paint job was conducted by powder coating, after the surface has been sandblasted beforehand. Such a way of applying the paint provides a higher than usual paint resistance against abrasion. The body bears USMC markings.
All parts of the replica fit very well together – a standard so high that so far it could only be observed solely in replicas from such well-known brands as G&P or Classic Army – and it is exceptionally well balanced. All that makes this replica highly maneuverable and its weight is practically imperceptible when put against the shoulder.
Features a fast spring release system, so-called Enter & Convert™. It allows for rapid and seamless adjustment of spring’s strength to expected conditions on simulated battlefield without a workshop nearby or access to special tools – once the gearbox has been removed from the body, the process of changing the spring takes mere seconds.
Advantages of Enter & Convert™ cannot be overestimated. In the light of currently reigning policy in Europe to adhere to law enforced restrictions on muzzle velocity of the replica and regulations concerning the environment itself, this system guarantees the user wide possibilities and a lot of freedom. Enter & Cover™ system allows with minimal amount of time to exchange the main spring, as a result, to adjust muzzle velocity of the replica to the battlefield area so that the best compromise between fire efficiency and safety of the user as well as other players is struck.
The replica is fully compatible with LiPo and LiFe batteries. Stock muzzle velocity of ~420 FPS is guaranteed by the default main spring, which allows this replica to perform well on medium distance. The set includes a M90 spring, which allows to reduce the muzzle velocity to ~320 FPS, thus adapting the replica to use in close quarters and indoors.
A gearbox with reinforced piston head holds a steel spring slide, which is a part of Enter & Cover™ system and 8mm ball bearings mounted steel gears. The system is safeguarded by four anti-reversal latches. A lightweight, polycarbonate piston was equipped with steel tooth in order to increase its durability. Other implemented parts include: a type 2 cylinder, steel circuit breaker and metal hop-up chamber.
The replica has a top, 22mm, RIS rail and an adjustable stock. The top RIS rail features flip-up iron sights, which can be easily detached and replaced with any optical sight. A collapsible stock with an anti-slip texture stockpad allows the user to adjust the length of the replica to his/her body type and preferences. A standard flash hider is mounted on a 14mm, left-hand thread, which allows for its replacement with a silencer.
This model features a 12”, modular, KeyMod handguard. The KeyMod module can be expanded upon with dedicated segments, for instance, RIS rails (KeyMod nuts) in any position or configuration due to holes around the handguard (KeyMod slots).
It is an airsoft replica of a KeyMod handguard, its size may vary from original. We do not guarantee full compatibility of KeyMod handguard with dedicated KeyMod accessories.
In order to increase the realism, the replica has an operational bolt release mechanism.
The replica comes with a steel, hi-cap magazine with a capacity of up to 300 BBs. The magazine’s paint colour corresponds to the colour theme of magazine for live firearms usually used by military.
Additional accessories shown in photographs are not included in the kit!
This replica has been outfitted with the most up-to-date gen.4+ ASCU2 module, installed in our service department.
In the latest ASCU gen.4+ module we receive an updated software that will protect it against damages caused by a low quality Li-Po battery.
The ASCU is a two-part electronic module ( the control module and the sensor module ) which, upon being installed in the Airsoft replicas, significantly improve their operation. The traditional joint module was replaced with a sensor module which monitors the actual position of the piston thread-wheel, the firing mode selector lever and the trigger. The gathered information is sent to the control module – in which the software located in the processor analyzes it and controls the replica’s motor with the use of the MOSFET active break.
ASCU Gen. 4 includes the following upgrades:
1. New MosFet transistors with 16 times less resistance, resulting in to faster cycle, better active brake, more shots per battery charge and less heat.
2. New very strong trigger switch.
3. New reinforced design with full polymer encasing.
4. Better short-circuit protection.
5. Easier installation.
6. Updated software with easier programing (accidental hop-up program activation is impossible).
7. Improved cut-off lever.
8. Improved selector plate.
9. Fits all standard and reinforced version 2 gearboxes.
10. 3 year world wide warranty.
The ASCU improves the operation of a V.3 gearbox and makes that the replica equals the more expensive replicas and the more sophisticated PTW class replicas. The ASCU system monitors the operation of the replica no matter the speed of squeezing the trigger and is responsible for the full cycle of the piston’s operation, both in the semi-automatic and full automatic firing modes. The piston stops in the starting position after each shot.
The ASCU is equipped with the Low Drain Protection system which is specially designed to secure the lithium-polymer (LiPo) batteries from being damaged.
In case of any emergency, the ASCU stops the firing mode in the replica and, therefore, secures the inner elements from further damage.
The ASCU is easy to install in the replica which is equipped in the V.2 gearbox. Most of the models does not require the modification of the airsoft rifle’s original parts. Yet, in some cases, some minor changes may have to be introduced – thanks to this the installation process will be completed without any problems.
11,1V or 12V Battery is recommended!
7,4V to 8,4V Battery to be used only with M90 up to M100 springs.
The use of high quality motor with ASCU2 gen.4+ is highly recommended.
The use of high quality battery with ASCU2 gen.4+ is highly recommended.
The set includes:
- A replica
- A magazine
- Iron sights
- Additional main spring
- A battery
- A charger
According to report number HKGEC1600157401
This product is compliant with EU RoHS (Restriction of Hazardous Substances) Directive 2011/65/EU annex II, replacing Directive 2002/95/EC, concerning limiting the amount of hazardous substances in toys and electronics.
Which means that the Specna Arms brand is free of the following hazardous materials:
- Hexavalent chrromium
- Polybrominated biphenyls
- Polybrominated diphenyl ether
- Bis(20ethylhexyl) phthalate
- Butyl benzyl phthalate
- Dibutyl phthalate
- Diisobutyl phthalate
Replika karabinka SA-B14 KeyMod 12" (ASCU Gen.4 version)
It is the spped of bb, while its leaving the innerbarrel of replica. This speed is measured in FPS (Feet Per Second).
1 FPS = 0,3 m/s
1 J = 99 m/s
1 J = 326,7 FPS
~400 / ~310
|Propulsion / Powered by:|
Indications v2, v3, v6 does not mean the level of advance, but only shape of gearbox skeleton which was used and selected by the manufacturer depending on the capabilities of the body of the replica. For example, a models of the M4/M16 family, MP5, have a v2 gearbox, while the AK family have gearbox v3.
Modified v2 Gearbox
|Type of fire:|
The length of the replca is measured between the two most distant points of each other. Different models have several of these values, because of its design allows to increase or decrease it length (eg. folding stock or extended flash hider).
815 - 900
|Inner barrel length [mm]:|
This is a value that includes the weight of the replica, magazine and other accessories that are include in set without a battery, charger, cleaning rod, etc., etc.
|Battery Capacity [mAh]:|
Battery capacity determines the time, which it accumulated enough energy to work gearbox. The greater capacity, then replica will shoot longer.
|Magazine capacity [pcs]:|
Hop-Up system is used for overclocking bb during the shot (putting it in rotation), through which, it extends its flight path. Acting laws of physics make that bb lift up, while the gravitational force take it down. Appropriate adjustment of Hop-Up, will compensate for these two factors, which result in long and straight flight for longer distance and be greater focus shot (to improve accuracy).
Blow back is a simulation system of the cocking lever - it imitates the work of it as the equivalent sharp. This system raises the realism and adds a lot more experience during shooting.
ZnAl + steel + plastic
rechargeable battery is characterized by high efficiency
current-carrying capacity, but there are disruptive effect on memory.
Should be unloaded and loaded in the full cycle, ie, it is recommended
to fully discharge, and after unloading must charge the battery
immediately without leaving it for a long time in a discharged state.
|Battery Voltage [V]:|